How to setup an Nginx reverse proxy and also provide a global X.509 certificate for it
Nginx is a powerful reverse proxy engine, capable of intercepting any HTTP request for a specific server and redirecting it to a targeted port.
Using Nginx in such a way helps define subdomains for different services.
For example, suppose you are in control of a domain name called "pentilescu.com". You wish to establish subdomains for different services, such as: having a Bitwarden HTTP server accessible at "passwords.pentilescu.com", a gitea HTTP server accessible at "git.pentilescu.com" and a personal webpage at "alexandru.pentilescu.com".
"pentilescu.com" is the master domain, an umbrella under which all the other services reside. Each of these services can run on a different machine, if you wish for it, or it can run on the same machine.
All you have to do is configure an Nginx server on the machine that's being pointed to, via DNS, as "pentilescu.com". Then, Nginx can redirect all HTTP requests destined to various pre-configured subdomains to other machines or to different ports on the same machine, effectively orchestrating all requests according to well defined matching rules. It can, say, redirect all HTTP requests destined for "passwords.pentilescu.com" to localhost port 187, all HTTPS requests destined for "git.pentilescu.com" to localhost port 200 and all "alexandru.pentilescu" requests to local device 192.168.1.3 port 9030.
This gives administrators flexibility to configure all services on various machines and ports and then, at a single gateway endpoint, configure Nginx to redirect all requests to each of them, accordingly.
This is the power that a reverse proxy allows. And all of this can be attained without having to configure any subdomain DNS records.
Let's see how such configurations will look!
Installing Nginx
First and foremost, Nginx must be installed on the machine being pointed to by the main domain via DNS. This machine will serve as the gateway for all the requests coming into the current network, requests that must be serviced by a machine within this network.
As Nginx is licensed under a free software copyright license, it's found, usually, under most Linux repositories. Use the method to install it specific to your own Linux distribution! Usually, a simple "sudo apt-get install nginx" is sufficient. This implies, of course, that you have administrative privileges over the gateway machine.
Once the installation is done, you have to configure Nginx to start looking for user-defined configuration files in appropriate directories.
To do so, please edit "/etc/nginx/nginx.conf" to look like the following:
user nginx;
worker_processes auto;
error_log /var/log/nginx/error.log notice;
pid /var/run/nginx.pid;
events {
worker_connections 1024;
}
http {
include /etc/nginx/mime.types;
default_type application/octet-stream;
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
access_log /var/log/nginx/access.log main;
sendfile on;
#tcp_nopush on;
keepalive_timeout 65;
#gzip on;
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*.conf;
}
Please note that, the only new line which I added apart from the pre-existing ones that come by default with this file, was "include /etc/nginx/sites-enabled/*.conf;", almost at the end.
What this line does is tell Nginx to take into account any file with the ".conf" extension from within "/etc/nginx/sites-enabled/" and import its configuration into this master configuration file, temporarily.
Effectively, this means, whenever you wish to add another endpoint subdomain to your domain name, you just have to create a new ".conf" file under "/etc/nginx/sites-enabled" and Nginx will automatically accept it, provided the syntax in that file is correct.
Ideally, "/etc/nginx/sites-enabled" should only contain symbolic link files to actual physical files stored in "/etc/nginx/sites-available". This is to allow partially defined services being configured offline in their own directory and, only after the configurations are fully complete, can they be activated by creating a symlink to their file.
Moreover, whenever a service needs to be disabled again, its configuration file doesn't have to be physically deleted in its entirety. All that has to be done is deleting the symbolic link pointing to it from "/etc/nginx/sites-enabled" and, afterwards, the file itself will remain on the drive under "/etc/nginx-sites-available" where it can be edited afterwards, until it can be reactivated again by the re-creation of a new symlink to it.
Handling symbolic links is very easy and straightforward.
Of course, one needs to remember, at all times, the following rules:
- When activating or deactivating a service, one must create or delete symbolic links in "/etc/nginx/sites-enabled"
- When configuring a new service from scratch, one must first create the actual configuration file under "/etc/nginx/sites-available" and, only after the configuration is complete, then one must create a symbolic link to that file in "/etc/nginx/sites-enabled"
Remembering these might seem difficult at first glance, but it will soon become second nature to most administrators.
If this is too difficult to remember, you can always use only "/etc/nginx/sites-enable" to store your actual configuration files, instead of storing symbolic links. This is not the recommended usage for them but is an option.
Now, time to write a configuration file from scratch for our bitwarden service!
Example of a service configuration file
Please take a look at the following configuration file for our Bitwarden endpoint:
server_name passwords.pentilescu.com;
root /var/www/;
listen [::]:443 ssl http2; # managed by Certbot
listen 443 ssl http2; # managed by Certbot
index index.html;
location / {
proxy_pass http://localhost:5178/;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
client_max_body_size 0;
add_header Strict-Transport-Security "max-age=31536000; includeSubDomains; preload";
add_header Referrer-Policy "same-origin";
access_log /var/log/nginx/bitwarden.access.log;
error_log /var/log/nginx/bitwarden.error.log;
}
include /etc/nginx/snippets/ssl.conf;
}